While you’re still fairly new to the market stall game, it’s generally accepted that you’ll spend a certain amount of time perfecting your market stall set-up and visual merchandising, in order to get it just right. When I was attending markets regularly, I went through several iterations of layout and styling before perfecting my own market stall. One tiny detail that I could never get quite right was how to display my price cards.

I like to have price cards set up next to each group of products instead of on every single individual item, as this saves loads of time prepping my products for market. What I was after was a clean, simple way to display the price cards, that wouldn’t detract from my products or styling of my stall. I thought about how I could achieve this, and came up with a super simple design – a short length of square pine, with a slot cut along the top length to hold the card (much like the little stands that come with the quote cards from Kikki K and the like).

I went ahead and made a simple price card stand, and here’s exactly what I did, so you can make your own, too!

DIY-market-stall-price-card-stand

As with most of my DIY posts, I have a couple of disclaimers:

Disclaimer #1: I didn’t measure anything (as usual), and as a consequence the ends of my little stand are wonky (as usual). So if you want your stand to be more accurate and straight, I’d definitely get the ruler out to mark a line around your timber first, so you can make sure your cut is straight!

Disclaimer #2: The awesome people at Bosch have sponsored this post, and supplied me with the multi-tool I talk about. I highly recommend equipping your toolshed with some basic power tools if you’re planning on building anything yourself – the multi-tool was surprisingly easy to use, and did the job perfectly.

You might also like to read: Market Stall Tips with SummerBlossom Handmade

Tools & Materials:

  • Pencil
  • Ruler
  • Bosch handheld multi-tool (quick and easy)
  • 1 qty: Porta 1.8m 30mm x 30mm (or more if you need more stands!)
  • Clamp

diy-market-stall-tools

Step One:

Cut your timber to the desired length using the “wood” attachment of the multi-tool

diy-market-stall-timber

I am literally doing this project on my kitchen bench, and there was basically no mess to clean up afterward, it was actually kinda weird. Normally when I cut anything there’s sawdust for days, but not this time! I can’t guarantee you’ll have the same results 😉 

Step Two:

Using the pencil and ruler, draw a line down the centre of the piece of timber. 

diy-market-stall-ruler

Clamp one end of the timber piece to give a bit more leverage (you don’t want you’re fingers getting anywhere near that blade!), and carefully cut the slot along the top edge of the timber.

diy-market-stall-clamp2

diy-market-stall-cutting

Step Three:

Put the sanding attachment on the multi-tool, and sand around the corners and cut edges. I gave this two go-overs, one with a rough sandpaper and one with a smooth (finer grit) paper, to make it all nice and smoooooth.

diy-market-stall-sanding1

diy-market-stall-sanding

And that is IT! It took me less than 5 minutes to make this little guy, and I reckon if you batched a whole bunch it would be even more efficient. 

diy-market-stall-finished-stand1

You could also paint them (all over or dipped would look cool too), or illustrate them, burnish them, stain them… whatever suits your brand! 

diy-market-stall-finished-stand

Please do let me know if you try this project, and check out the DIY market shelving post too.

 

CAN YOU CONFIDENTLY SAY YOU ARE WORKING ON THE RIGHT THING, RIGHT NOW IN YOUR BUSINESS?

Sometimes, even when we are doing all the right things, it can feel like we’re spinning our wheels and not moving forward at all. This could be because you’re focusing on the wrong area of your business – or doing all the right things, but at the wrong time.

Pin It on Pinterest

Did you find this helpful?

Please share this post with your friends!